新闻中心

  • 新闻中心
您现在的位置:主页 > 新闻中心 >

新闻中心

济南发光字灯箱底版模具的计算

页面更新时间:2015-08-14 10:50 来源:未知 作者:admin 点击:

通过济南发光字,大家对冶金标样或多或少的都有了一些了解.为了能让大家更好地了解这方面的知识,在接下来的内容里,康明达就来给大家介绍一下济南发光字 http://www.kangmingda.com/ 灯箱底版模具的计算方法.

Through Jinan luminous characters, all of metallurgical standard sample more or less have some understanding. In order to be able to give you a better understanding of the knowledge, in the following content, Kang Mingda to give everybody to introduce Jinan Luminescence Character Lightbox bottom slab mold is calculated.

1、用总长度 - 底板两侧的留边尺寸 = 剩下要制作模具的总长度.

1, with the total length of the two sides of the bottom left side of the size = left to make the total length of the mold.

2、用剩下要制作模具的总长度 / 等份分割的块数 = 要制作底板模具的尺寸.

2, with the remaining total length / tooling equal division blocks to make the floor = the size of the mold.

3、用总宽度 - 底板两侧的留边尺寸 = 剩下要制作模具的总宽度.

3, with the total width of the bottom left side of the side of the left side of the remaining to make the total width of the mold.

4、用剩下要制作模具的总宽度 / 等份分割的块数 = 要制作底板模具的尺寸.

4, with the remaining total width / tooling equal division blocks to make the floor = the size of the mold.

5、把 2 和 4 算出的尺寸分别- 5 毫米,是两块底板拼接时缝隙的损耗(也就是拼接不严的损耗).

2, 5 and 4 calculated the size of respectively - 5 mm, is the two pieces of the bottom plate splicing loss (that is, the splicing is not strictly the loss).

6、最后总尺寸的长短,由成型后的多块亚克力底板拼接在一起后,在底板的两侧边上找.

At the end of 6, the total size of the length, is composed of a plurality of acrylic plate after splicing together, in both sides of the base plate.