新闻中心

  • 新闻中心
您现在的位置:主页 > 新闻中心 >

新闻中心

简析济南灯箱制作流程

页面更新时间:2015-07-03 11:50 来源:未知 作者:admin 点击:

(1) 制作模具、常用模具都是木模,用本公司生产模版锯一次制作完成,还可用手提往复据(价格200-1000元左右)制作模具。

(1) mold making, mold is common wood, used the company's production template saw a completed, also available hand-held reciprocating according to price 200-1000 yuan) mold fabrication.

(2) 对模具深加工:打磨、修边、使模具圆滑平整。

(2) the deep processing of the mold: grinding, trimming, making the mold smooth leveling.

(3) 模具在吸塑平台定位,阴阳模具对准位置重合固定。

(3) the mold is positioned in the plastic platform, and the alignment of the Yin and Yang dies is fixed.

(4) 亚克力板材加热,吸塑设备主机温度常用上限设制在70℃下限在150℃。

(4) acrylic sheet heating equipment, plastic limit set in the host temperature of 70 DEG C lower limit at 150 DEG C.

(5) 亚克力板材加热变达到软需要的温度后,放在(I型、Ⅱ型)吸塑平台上吸压成型。

(5) acrylic sheet is heated to the required temperature soft, put in (type I, type II) plastic suction molding platform.

(6) 成型后的半成品亚克力面板,由铣边机铣掉多余边角。

(6) semi-finished acrylic panel after forming, milling by the milling machine redundant edges.

(7) 亚克力面板与亚克力字拼接(注:只作亚克力字灯箱不用此工序)。

(7) acrylic panel stitching with acrylic word (Note: only for acrylic character Lightbox without this procedure).

选择适当的金属边框和电气照明设备金属边框的作用主要是把灯箱的各部分整合在一起,需要尺寸精确、外形美观,并具有一定的机械强度的密封性能,保护灯箱内部电气照明部分不会受到损伤。至于济南灯箱制作 http://www.kangmingda.com/ 的具体材料的使用,则需要根据实际情况来确定,可以使用铝合金型材、钢材等。

Choice of appropriate electrical lighting equipment, metal frame and metal frame is mainly the integration of all parts of the box together, precise size, appearance, and has certain mechanical strength of the sealing performance and protection box internal electrical lighting will not be damaged. As for the use of Ji'nan light box production of specific materials, you need to determine according to the actual situation, you can use aluminum alloy, steel, etc..